Silvercrest 327263_1904, Инструкция по эксплуатации и правила безопасности

Страница: 12 / 52

GB
│
IE
│
NI
│
CY
│ 9 ■ SAS 7.4 LI D3
4) Push the wall plugs into the holes and then screw the wall bracket
3
firmly
into place using the screws .
5) You can place the nozzles on the accessories holder on the side .
6) Connect the mains adapter
4 to a mains power socket .
Charging
NOTE
► Check to ensure that the on/off switch
6
has been pushed back (to the
position "0") before starting the charging process .
■ Place the handheld vacuum cleaner from above into the wall bracket
3
so
that the barrel plug
5
slips into the socket on the handheld vacuum cleaner .
The charge indicator lamp
7
lights up red and the charging process begins .
■ Important: The charge indicator lamp
7
lights up green once the
handheld vacuum cleaner is charged enough to vacuum again . This does
not mean that all the batteries are completely charged . When the charge
indicator lamp
7 lights up green, the batteries are charged to around 80% .
■ When charging is complete, which can take around 5 hours with fully dis-
charged batteries, the appliance automatically switches to a trickle charge
(maintenance function) . Nevertheless, in order to avoid possible damage
to the batteries, do not leave the appliance permanently connected to the
mains adapter
4
.
■ Do not recharge the batteries again until the handheld vacuum cleaner's suc-
tion power becomes appreciably weaker and the charge indicator
lamp
7
flashes green .
NOTE
► If the battery is completely discharged, the appliance switches off and
the charge indicator lamp
7
flashes green/red alternately for approx .
60 seconds . Start charging the appliance .
► The handheld vacuum cleaner can also be charged directly via the mains
adapter
4
. To do this, remove the barrel plug
5
with a slight twist from
the wall bracket
3
and the cable from the cable routing . Insert the barrel
plug
5
into the socket on the handheld vacuum cleaner .