■
16
│
GB
│
IE
│
NI
SLXL 20 A1
You hear no sound from the speaker
♦
The volume of the speaker is set to minimum. Increase the volume.
A connected device does not charge
♦
The integrated battery is empty. Charge the battery.
♦
No connection to the device. Check the connection.
♦
The speaker is switched off. Switch on the speaker.
♦
Briefly press the button to start the charging process.
♦
The charging current of the connected device is too low or too high.
♦
The internal overcurrent protection may have been triggered. Disconnect the
connected device and connect the micro-USB charging port to a power
source for a short while (see section
Charging the speaker
). Afterwards, the
speaker can be used again.
NOTE
►
If the above-mentioned solutions do not resolve the problem, please contact
Customer Service (see section
Service
).
Cleaning
CAUTION
►
Keep the protective cover closed during cleaning.
►
To avoid irreparable damage to the speaker, ensure that no moisture gets
into the speaker during cleaning.
►
Do not use caustic, abrasive or solvent-based cleaning materials. These
could damage the surfaces of the speaker.
♦
Clean the speaker only with a slightly damp cloth.
