9
GB/IE/NI
In the event of a leakage of
batteries / rechargeable batteries,
immediately remove them from the
product to prevent damage.
Remove batteries / rechargeable
batteries if the product will not be
used for a longer period.
Risk of damage of the product
Only use the specified type of
battery / rechargeable battery!
Insert batteries / rechargeable
batteries according to polarity marks
(+) and (-) on the battery / recharge-
able battery and the product.
Use a dry, lint-free cloth to clean the
contacts on the battery / recharge-
able battery and in the battery
compartment before inserting!
Remove exhausted batteries /
rechargeable batteries from the
product immediately.
Before first use (Fig. C)
Remove all packaging materials from the product.
Turn the product over and place it on a soft under-
lay to avoid scratching the surface. Loosen the
screw
6
located at the cover of the battery com-
partment
5
on the back of the product.
Open the cover of the battery compartment
5
on the back of the product.
Pull out the insulation strip from the battery
compartment
5
.
Close the cover of the battery compartment
5
and tighten the screw
6
.
Replacing the battery (Fig. C)
Turn the product over and place it on a soft underlay
to avoid scratching the surface. Loosen the screw
6
located at the cover of the battery compartment
5
on the back of the product.
Open the cover of the battery compartment
5
on the back of the product.
Remove the used battery, if present.
Insert a battery type CR2032 in the battery
compartment
5
.
Note:
Make sure you insert the batteries with the
correct polarity. This is indicated on the cover of
the battery compartment
5
.
Close the cover of the battery compartment
5
and tighten the screw
6
.
Operation
Set the product on a solid, level and flat surface to
weigh.
Weighing
Note:
Always place the object you wish to weigh
gently onto the weighing surface
1
to avoid damag-
ing the glass surface.
To activate the product, you may directly put a
load (e.g. food container) with minimum 250 g
onto the weighing surface
1
. Pressing onto the
weighing surface
1
with a certain force is also
