Silvercrest 311790, Руководство по эксплуатации

Страница: 19 / 74

■ 16 │
GB
│
IE
SSM 200 A1
Using the appliance
1) Take the fruits out of the freezer about
10 – 20 minutes before use .
2) Place a suitable bowl under the outlet
9
.
3) Remove the pusher
6
from the feed tube
2
.
4) Add the prepared fruits into the feed tube
2
.
5) Switch on the appliance using the on/off
switch
1
(position I) .
6) Applying light pressure, use the pusher
6
to
push the fruit into the appliance . The chopped
fruit will come out of the outlet
9
after a short
time . If the pusher
6
cannot be pressed further
down, remove it and add a little more fruit or
ingredients .
NOTE
► If you want to make a sorbet from several
different fruits/ingredients, add the different
fruits alternately into the feed tube
2
. In this
way, the fruits will be mixed directly .
7) Once all the fruits are chopped, stop the
appliance by moving the on/off switch
1
to
the O position .
8) Remove the power plug from the socket .
9) Unscrew the end cap
8
and pull the blade
roller
5
carefully out of the roller housing
3
.
10) Use a knife to scrape any remaining fruit
residue from between the blades on the blade
roller
5
and add this to the bowl .
11) Mix the fruit in the bowl .
You can now serve the sorbet .
Cleaning and care
RISK OF ELECTRIC SHOCK
► Always remove the plug from the mains power
socket before you clean the appliance .
Ensure you never submerse the motor
unit
0
in liquid, and never allow liquid to
enter the motor unit housing
0
.
WARNING! RISK OF INJURY!
► Take great care when handling the blade
roller
5
.
♦ Clean the motor unit
0
with a moist cloth after
every use . If there is heavy soiling, add mild
detergent to the cloth . Rinse detergent residues
off with clear water . Ensure that there are no
detergent residues on the appliance, and that
the appliance is completely dry before renewed
use .
♦ Remove the pusher lid
7
from the pusher
6
for cleaning purposes .
♦ Wash the pusher
6
, the pusher lid
7
, the
blade roller
5
, the end cap
8
and the roller
housing
3
in lukewarm water with a little
detergent .
♦ Ensure that all parts are completely dry before
re-use .
NOTE
The blade roller
5
, pusher
6
, pusher
lid
7
, end cap
8
, and the roller
housing
3
can be cleaned in a
dishwasher .
Place the parts, where possible, in the upper
basket and ensure that none of the parts can
get stuck . Otherwise they could get bent or
otherwise deformed .