■
42
│
GB
│
IE
SPLB 44 A1
Troubleshooting
This section contains important information about fault identification and rectifica-
tion. Follow the instructions to avoid hazards and damage. The following table
will help you to identify and rectify minor malfunctions:
Fault
Possible cause
Remedy
There is nothing
on the display .
The integrated battery is
empty.
Plug the power plug into the socket to
recharge the integrated battery.
The socket is not supplying
any power.
Check the house fuses.
The main switch is set
to the position.
Set the main switch to the position.
No sound.
The volume is set to
minimum.
Increase the volume using the
dial .
The device is not in the
required operating mode.
Press the
button until you
have selected the required operating
mode.
Interference
occurs during
radio reception.
The reception is too weak.
Try to improve reception by moving
the FM wire aerial .
The
Bluetooth
®
connection cannot
be established.
The
Bluetooth
®
connec-
tion is not activated on your
playback device.
Make sure that the
Bluetooth
®
function is activated on the playback
device.
Another playback device is
still paired with the device.
If you use several playback devices,
ensure that any previous connection
is disconnected. There may be a
previously paired playback device still
within range.
The distance between the
device and the playback
device is too great.
Ensure that the device is no more than
10 metres away from the playback
device.
No sound is
produced by the
microphone.
The microphone has not
been correctly connected.
Ensure that the microphone is correctly
connected to one of the two 6.3 mm
jack sockets
/
.
The volume is set to minimum.
Increase the volume using the
dial .
The microphone is not
switched on.
Slide the On/Off switch
to the
position to switch the micro-
phone on.
