7
GB
Water as foodstuff
Water is a very sensitive foodstuff and can go
bad due to germs forming. Please take note:
• Always use fresh drinking water in the
kettle
|
5
.
• Pour water away, which has been
standing in the kettle
|
5
for longer than
approx. 1 hour.
• Do not reboil cooled down water.
Boiling water
1. Remove the kettle
|
5
from the device
base
|
7
.
2. Press the release button
|
3
to open the
lid
|
2
.
3. Fill the desired amount of fresh drinking
water into the kettle
|
5
. Keep it upright
or place it on an even surface to be
able to read the water level display
|
10
correctly.
4. Close the lid
|
2
, by pressing it down-
wards.
5. Place the kettle on the device base
|
7
.
6. Insert the mains plug
|
8
into a readily
accessible earthed wall socket whose
voltage matches the voltage stated on
the rating plate.
7. Press the on/off switch
I
/
O
|
6
down, un-
til it lights up and remains in position
I
.
8. The device automatically switches off as
soon as the water starts to boil. The
on/off switch
I
/
O
|
6
jumps back to posi-
tion
|
O
and the light goes off.
9. Disconnect the mains plug
|
8
from the
wall socket.
10.Remove the kettle
|
5
from the device
base
|
7
and pour the water out.
8. Cleaning
DANGER! Risk of electric
shock!
~
Pull the mains plug
|
8
out of the wall
socket before you clean the kettle
|
5
.
~
The kettle
|
5
, the device base
|
7
, the
power cable and the mains plug
|
8
must
not be immersed in water or other liq-
uids.
DANGER! Risk of injury
through scalding!
~
The kettle
|
5
becomes very hot during op-
eration. Allow it to cool down before
cleaning.
WARNING! Risk of material damage!
~
Do not use any astringent or abrasive
cleaning agents.
After every use
Clean the device after every use, if possible.
1. Pour out any remaining water.
2. Disconnect the mains plug
|
8
from the
wall socket.
3. Wipe the kettle
|
5
, the device base
|
7
and the power cable
|
8
with a damp
cloth if necessary. Dry with a dry cloth.
4. Allow all parts to dry completely before
you put them away or use the device
again.
Cleaning the limescale filter
1. Open the lid
|
2
.
2. Fold out the limescale filter
|
11
and re-
move it from the holder
|
13
.
3. Clean the limescale filter
|
11
with a
moist dishcloth under running water.
NOTE:
should you be unable to remove the
limescale residues completely this way dur-
ing descaling, put the limescale filter in a
