Silvercrest 305857, Инструкции по эксплуатации и безопасности

Страница: 53 / 85

109 GB/MT
Operation via app Operation via app / Cleaning and storage / Troubleshooting
In the “Profile“ menu, click “Share your robot“.
Select your robot. The app will then show the
QR code and the user can scan the QR code
to be able to control the robot vacuum cleaner.
The other user must now open the “Profile“ menu
and click “Scan QR-Code“.
Use a different mobile to scan in the code and
be able to control the robot vacuum cleaner.
Feedback
In the “Profile“ menu, click “Feedback“.
Enter your e-mail address and select your robot
model from the drop-down menu. Describe your
problem. You may also upload pictures. Then
submit the message.
Cleaning and storage
Set the power switch
10
to “O“ before clean-
ing the product.
Unplug the mains lead
4
from the mains socket
before cleaning the product.
Do not rinse the product directly with water.
Do not wipe the product with a cloth soaked
in water.
Disconnect the power supply if the product will
not be used for an extended period.
Cleaning the dust collector
Remove and empty the dust collector
18
.
Remove the filters
6
,
26
,
27
. The HEPA filter
6
can be cleaned by tapping. Do not wash it with
water.
Rinse the dust collector
18
and the main filter
26
.
Keep the dust collector
18
and accessories dry.
Cleaning the brushes
Remove the main brush
20
and clean off any
hair or dirt.
Remove the side brushes
21
and remove any
hair or dirt.
Cleaning the main housing
Clean the front castor
23
to remove any hair
tangled in it.
Clean the anti-drop sensor
22
to maintain its
sensitivity.
Clean the anti-collision sensor
24
to maintain
its sensitivity.
Cleaning the charging dock
Clean the charging contacts
3
on the underside
of the robot vacuum cleaner and the charging
dock with a dry cloth.
Troubleshooting
If the product is not working correctly, the display
1
will show various error codes and emit different length
beeps. Please refer to the table below for trouble-
shooting