Silvercrest 302461, Руководство по эксплуатации

Страница: 26 / 46

GB
│
MT
│
23 ■
SPLD 2 A1
Count-up function
♦ If the timer
3
is in standby mode, press any button
to switch it on .
♦ If the display
5
shows the last set time, simulta-
neously press the buttons "Min"
7
and "Sec"
4
(=reset) to reset the time .
♦ To start the count-up, press the "Start/Stop" button
6
.
NOTE
► You can stop the count-up at any time by press-
ing any button . To resume the count-up, press
the "Start/Stop" button
6
.
Cleaning
CAUTION! PROPERTY DAMAGE
► Do not use abrasive, chemical or caustic cleaning
agents to clean this product . These could damage
the surface of the product .
► Never immerse the timer
3
in water or other
liquids .
♦ If you have not already done so, detach the tim-
er
3
from the Pasta Server and clean it with a
damp cloth . If necessary, put a little mild detergent
on the cloth and wipe the product off afterwards
with a cloth dampened with clean water only .
♦ Clean the Pasta Server
1
in warm water using a
mild detergent . Allow the product to dry thoroughly
before reattaching the timer
3
.
NOTE
You can also clean the Pasta Server
1
in
the dishwasher . Make sure to remove the
timer
3
first .