Silvercrest 297423, Руководство по эксплуатации

Страница: 10 / 40

GB│CY
│
7 ■ STK 650 A2
4) Remove the brewing system and pull the riser pipe q with the sieve w
upwards .
5) Add the desired quantity of tea or teabags to the brewing chamber 0 .
NOTE
► Ensure that no tags or bag threads remain in the device .
6) Replace the brewing system in the jug 3 . Ensure that the riser pipe q fits
into the recess on the floor of the jug 3 . The brewing chamber 0 must be
inserted with the flattened side towards the handle
2
.
7) Close the lid 1 .
8) Replace the jug 3 on the base 5 .
9) Insert the mains plug into a mains power socket and set the On/Off switch 8
to the position "I" . The control lamp
4
and the On/Off switch
8
light up .
The water is now boiled, pressed upwards through the riser pipe q and flows
through the brewing chamber 0 back into the jug 3 .
After the water is boiled, the appliance switches to the keep-warm function . The
control lamp
4 goes out . Only the On/Off switch 8 remains lit up . As soon as
the water cools down, the tea maker boils it again . The control lamp 4 lights up
again during the boiling process .
NOTE
► As the water is fed back through the brewing system when it is re-boiled,
remove the brewing system from the jug
3 after the first brew .
WARNING! RISK OF INJURY!
► The brewing system is very hot! There is a risk of burns! Use oven gloves
when you touch the brewing system .
NOTE
► The longer you keep the drink warm and the more liquid evaporates, the
stronger the drink will become . We therefore recommend drinking the tea
as quickly as possible after it is initially brewed .
■ You can interrupt the boiling process at any time . To do this, set the On/Off
switch
8 to the "0" position . The boiling process stops .
■ Once you remove the jug 3 from the base 5 the boiling process stops .
CAUTION! PROPERTY DAMAGE!
► Always allow the jug 3 to cool down before refilling it with cold water
for another brewing cycle . Otherwise, excessive tension in the glass could
cause the jug
3 to break .