20 GB/IE
NOTE:
The product only has the clock function when
the battery capacity is lower than 15 % (see
Fig. A).
Once charging is complete, disconnect the
micro-USB cable
15
from the power source.
z
Operation
z
Bluetooth connection
B
Switching on:
Position the
ON/OFF
switch
10
to
ON
. Press and hold
1
to enter the
Bluetooth
®
mode; a voice prompt says
“Enter
the Bluetooth
®
”; “bLUE” is displayed for
approx. 30 seconds and the Bluetooth
®
icon
is flashing in the display during pairing mode
(see Fig. B).
Activate Bluetooth
®
on your Bluetooth device.
Search for the products’ Bluetooth
®
name
SRW 10 A1
to enable pairing. The voice
prompt
“Connection successful” indicates that
a connection is successfully established; the
Bluetooth
®
icon is lit steadily in the display.
When playing music, the Bluetooth
®
icon is
flashing in the display.
De-activating Bluetooth
®
:
Press and
hold
1
to leave the Bluetooth
®
mode. The
Bluetooth
®
icon goes o
ff
in the display.
Switching o
ff
the product:
Set the
ON/
OFF
switch
10
to the
OFF
position.
NOTES:
The product automatically connects with
devices it has already been paired with before.
z
AUX/LINE-IN connection
AUX
C
Connect the audio cable
14
with the 3.5 mm
stereo jack (AUX)
11
and your device. The
“
AUX” icon lights up; “LINE” is displayed for
approx. 30 seconds (see Fig. C).
NOTE:
Bluetooth
®
connection has a higher priority
over the line-in connection. When removing
the audio cable
14
, the product automatically
enters into Bluetooth
®
mode.
z
FM mode
FM
D
Function
Operation
Toggle to
FM mode:
In Bluetooth
®
mode, press
and hold
3
. A voice
prompt says “
Radio”; the
frequency of the tuned
station is shown for approx.
30 seconds; the “
FM” icon
lights up (see Fig. D).
Searching for
channels:
Press
3
. Preset FM
radio stations are saved
automatically.
Switching between
channels:
Press
2
/
4
.
Increasing /
decreasing volume.
Press and hold
2
/
4
.
NOTE:
Beeps sound
while reaching min./max.
volume.
