Silvercrest 292299, Быстрый старт

Страница: 20 / 110

SBTF 10 E5
GB
│
IE
│
NI
│ 13 ■
Auto power function
The auto power function enables you to set the device so
that it switches back on automatically and connects to a
known mobile phone as soon as the built-in vibration sensor
is activated . If the device loses its connection to a mobile
phone, e .g . due to excessive distance, and it is not restored
within 10 minutes, it will switch to auto power function . If
there is a vibration, e .g . caused by opening the car door, the
device switches back on and automatically attempts to con-
nect to known mobile phones for about 2 minutes . If there is
no known mobile phone in range, the device switches back
to auto power function .
NOTICE
► If you deactivate the
Bluetooth
®
function on your
mobile phone, the hands-free set switches to the auto
power function after around 2 minutes .
► Depending on the mobile phone used, it is possible,
however, that the automatic connection cannot be
made . If this happens, press the
button briefly
to restore the connection . You will hear a beep .
► With some mobile phones, the connection must also
be confirmed on the mobile phone itself . Please also
refer to the operating instructions for the respective
mobile phone .
► If you do not always have your phone with you during
your journey, we recommend switching off the hands-
free set . In this way you will prevent the hands-free
set from switching itself on and off due to vehicle
movements, and prevent the internal battery of the
hands-free set from discharging .
♦ Switch the hands-free set on . The auto power function is
automatically switched on .
♦ Switch the hands-free set off . The auto power function is
automatically switched off .