18 GB/IE
Risk of damage of the
product
Only use the specified type of
battery / rechargeable battery!
Insert batteries / rechargeable
batteries according to polarity
marks (+) and (-) on the battery /
rechargeable battery and the
product.
Clean the contacts on the battery /
rechargeable battery and in the
battery compartment before
inserting!
Remove exhausted batteries /
rechargeable batteries from the
product immediately.
Q
Before first use
Note:
Remove all packaging materials from the
product.
1. Turn the product over and place it on a soft
underlay to avoid scratching the surface.
2. Loosen the screw located at the battery
compartment cover
8
on the back of the
product by using a screw driver.
3. Open the battery compartment cover
8
.
4. Remove the insulating strip from the battery
compartment
7
.
5. Close the battery compartment cover
8
and
tighten the screw by using a screw driver.
Q
Replacing battery
1. Turn the product over and place it on a soft
underlay to avoid scratching the surface.
2. Loosen the screw located at the battery compart-
ment cover
8
on the back of the product by
using a screw driver.
3. Open the battery compartment cover
8
.
4. Remove the used battery from the battery com-
partment
7
by gently pulling the grip
9
outwards. Make sure that you do not exert too
much pressure on the grip
9
or it may other-
wise be damaged.
Remove the battery from the battery compart-
ment
7
.
5. Insert the new battery (as specified in section
„Technical data“). Make sure that the polarity is
correct. The battery must be pressed inside the
battery holder.
Note:
Make sure you insert the battery with
the correct polarity. This is indicated in the bat-
tery compartment cover
8
.
6. Close the battery compartment cover
8
and
tighten the screw by using a screw driver.
Q
Operation
Q
Weighing
Note:
Starting with or without the weighing
bowl
1
, the product always starts at 0 g / 0.0 oz
(the temperature will also be shown) when you
switch it on.
However, if you place the weighing bowl
1
on
the product after you have switched it on, the
product will indicate the weight of the weighing
bowl
1
. Press the Zero button
6
to reset the dis-
play to 0 g / 0.0 oz. The product now reads “TARE“.
Place the weighing bowl
1
on the product.
Press the ON / OFF button
2
to switch the
product on.
Select the unit of weight by pressing the unit of
weight button
5
. You can choose between
“g / kg“ and “oz / lb“.
Place the food you wish to weigh in the weigh-
ing bowl
1
.
The LCD readout
4
indicates the weight of the
food in the selected unit of weight.
