Silvercrest 288315, Руководство по эксплуатации

Страница: 9 / 40

■ 6
│
GB│IE│NI│CY STK 650 A2
Before first use
■ Remove all packaging materials from the appliance.
■ Rinse out all parts of the brewing system (brewing chamber , riser pipe
-
,
sieve
3
) and the jug carefully (see section "Cleaning and care").
Before first use, proceed as follows:
1) Remove the jug from the base .
2) Fill the jug up to the MAX mark and add a teaspoon of lemon juice (or
lemon juice concentrate). If you have no lemon, you can add a teabag (or
a teaspoon of loose leaf tea) directly to the water.
3) Insert the brewing system into the jug .
4) Close the lid and place the jug on the base .
5) Switch the appliance on with the On/Off switch . The control lamp
and the On/Off switch light up. Wait until the control lamp goes off.
6) Switch off the appliance using the On/Off switch and clean the appli-
ance as described in "Cleaning and care".
The tea maker is now ready for use.
Operation
CAUTION! PROPERTY DAMAGE!
► Do not add any sugar to the tea maker. Do not heat any milk or alcohol in
the tea maker. This will irreparably damage the appliance.
NOTE
► Green tea is not suitable for brewing in the tea maker. The ideal brewing
temperature for green tea is around 70°C. At higher brewing temperatures,
such as those used by the tea maker, tannins are released. This makes the
tea taste bitter.
1) Remove the jug from the base .
2) Open the lid and remove the brewing system. Place the brewing system
on a level system.
3) Add the required amount of water to the jug . Never fill water to more
than the MAX marking or less than the MIN marking.
DANGER! ELECTRIC SHOCK!
► To prevent scalds and electric shocks, ensure that the water in the jug
never overflows.