21
GB/IE
Q
Weigh and add
The kitchen scale
2
allows you to carry out con-
secutive weighings without emptying the weighing
bowl
1
between weighings.
Place the weighing bowl
1
on the weighing
platform
6
.
Press the On / Off / Zero button
5
to switch
on the kitchen scale
2
.
Wait until the LC display
4
stops and stabi-
lizes on 0 g
16
, 0:0.0 lb:oz
19
or 0 ml
17
or
0.0 fl’oz
18
, which will be the mode the kitchen
scale
2
was in when it was last switched off.
Press the mode setting button
3
to set the
kitchen scale
2
to weighing mode
22
(preset
to g or lb:oz).
Place the substance to be weighed into the
weighing bowl
1
to start the weighing process.
The LC display
4
shows the weight of the first
substance placed in the weighing bowl
1
.
Press the On / Off / Zero button
5
the kitchen
scale
2
now reads “T“ (TARE)
25
.
You can add further substances into the weighing
bowl
1
in the same way, the LC display
4
shows the weight of the added substance.
Press the On / Off / Zero button
5
between
each new substance.
Continue in this way only until the maximum
capacity of the kitchen scale
2
is reached or
the weighing bowl
1
is full.
Q
Removing part of the weight
from the kitchen scale
Place the weighing bowl
1
on the weighing
platform
6
.
Press the On / Off / Zero button
5
to switch
on the kitchen scale
2
.
Wait until the LC display
4
stops and stabilizes
on 0 g
16
, 0:0.0 lb:oz
19
or 0 ml
17
or
0.0 fl’oz
18
, which will be the mode the kitchen
scale
2
was in when it was last switched off.
Press the mode setting button
3
to set the
weighing mode
22
(preset to g or lb:oz).
Place the substance to be weighed into the
weighing bowl
1
to start the weighing process.
The LC display
4
shows the weight of the first
substance placed in the weighing bowl
1
.
Press the On / Off / Zero button
5
to reset the
LC display
4
to zero; the “T“ (TARE)
25
appears.
Now remove the desired amount of substance
from weighing bowl
1
. The LC display
4
shows the weight of the substance removed
from the weighing bowl
1
as a negative value.
Press the On / Off / Zero button
5
to reset the
LC display
4
to zero, the “T“ (TARE)
25
appears.
Now the kitchen scale
2
is ready for further
removal / adding substances.
Q
Automatic or manual switch-off
The kitchen scale switches itself off automatically
if it has not been used for 2 minutes.
Press the On / Off / Zero button
5
for longer
than 3 seconds to switch off the kitchen scale.
Q
Volume units display mode
Place the kitchen scale
2
on a solid, flat surface.
Press the On / Off / Zero button
5
to switch
on the kitchen scale
2
.
Wait until the LC display
4
stops and stabi-
lizes on 0 g
16
, 0:0.0 lb:oz
19
or 0 ml
17
or
0.0 fl’oz
18
, which will be the mode the kitchen
scale
2
was in when it was last switched off.
Press the mode setting button
3
until milk
21
or water
20
appears as the volume mode with
the units as ml or fl’oz.
Place a container for liquid or the weighing bowl
1
on the weighing platform
6
.
Press the On / Off / Zero button
5
to set the
LC display
4
to zero (0 ml or 0.0 fl’oz). Pour
milk or water (as selected previously) into the
container.
The LC display
4
now automatically shows
the volume of liquid poured into the container,
either in ml or in fl’oz, depending on the setting.
Then press the mode setting button
3
to set the
kitchen scale
2
to weighing mode again and
read off the equivalent weight of the liquid (see
Fig. E).
