Silvercrest 279332, Инструкция по эксплуатации и правила безопасности

Страница: 74 / 82

SilverCrest SBTH 4.1 A1
72 - English
Getting started
Powering the headphones on/off
To power the headphones on, press and hold the ▸ll button (2) for approx. 4
seconds. The LED (8) flashes orange to indicate standby mode. If this is the first
time you power the headphones on and they were not paired with any device
before, pairing mode is started automatically. In pairing mode the LED (8)
flashes alternating blue and orange. Please read the next chapter to pair your
device.
To power the headphones off, press and hold the ▸ll button (2) for approx. 4
seconds. The LED (8) flashes orange multiple times while powering off.
Pairing the headphones
Proceed as follows to pair the headphones with your device.

Power the headphones off.

To start pairing mode, press and hold the ▸ll button (2) for approx. 6
seconds.

The LED (8) flashes alternating blue and orange. The headphones are now
in search mode. The search mode lets you connect a compatible Bluetooth
®
device to the headphones.

Next establish a Bluetooth
®
connection to a smartphone or audio/media
player. Please also read the smartphone or media player User Manual. From
the list of found devices, select "SBTH 4.1 A1" and establish the connection.
If you are prompted for a PIN, enter "0000".
While connected, the LED (8) briefly flashes blue every 4 seconds. If you
power off your device or move out of range, the headphones will toggle to
standby mode (not connected) and the LED (8) flashes blue quickly.
If you want to connect a different device to your headphones, you have to
repeat pairing as described above.