7
GB
4. Items supplied
1 hair and beard trimmer
1 power unit
|
8
2 adjustable comb attachments
|
1
:
Attachment 1:
1/3/6/9/12/15 mm
Attachment 2:
18/21/24/27/30/
33 mm
1 comb
|
12
1 scissors
|
13
1 cleaning brush
|
14
1 oil
|
15
1 storage pouch
|
16
1 set of operating instructions
5. Charging
NOTES:
• Before the device is used for the first
time, and during the following charging
procedures, the device should be
charged for 90 minutes in each case.
• When the batteries are almost empty,
the plug symbol
|
6
flashes in red. The
device can then only be used for a short
time without being connected to the
electricity supply.
1. Switch off the device with the on/off
switch
|
4
if necessary.
2. Connect the power unit
|
8
to the con-
nector
|
7
of the device.
3. Insert the power unit
|
8
into a readily
accessible wall socket whose voltage
matches the voltage stated on the rat-
ing plate.
4. The plug symbol
|
6
is lit red and the
battery is charged. When the battery is
fully charged, the battery symbol
|
5
flashes in blue. When the battery is ful-
ly charged, the device can be used for
approximately 60 minutes without be-
ing connected to the power supply.
6. Operation
Regardless of the charging state of the bat-
tery, the hair and beard trimmer can always
be mains-operated.
1. Before switching to mains operation,
ensure that the device is switched off.
2. Connect the power unit
|
8
to the con-
nection
|
7
of the device.
3. Insert the power unit
|
8
into a readily
accessible wall socket whose voltage
matches the voltage stated on the rat-
ing plate.
4. Switch on the device with the on/off
switch
|
4
.
6.1 Pushing on/removing the
comb attachments
WARNING! Risk of injury!
~
Switch off the device before replacing
or changing the comb attachments
|
1
.
Pushing on
• In order to attach a comb attachment
|
1
,
push this over the guide rails on the side
of the device onto the comb attachment
fastener
|
9
, until it is heard to click into
place.
Removing
1. Push the comb attachment
|
1
upwards us-
ing a moderate amount of force. The
comb attachment
|
1
is released from the
comb attachment fastener
|
9
.
2. Remove the comb attachment
|
1
.
6.2 Cutting hair
NOTES:
• The hair to be dressed must be dry.
• The cutting length may deviate depend-
ing on the cutting angle.
BB1$6B%ERRN6HLWH'LHQVWDJ-XOL
Содержание 278242
Страница 15: ...13 GB BB1 6 B ERRN 6HLWH LHQVWDJ XOL ...
Страница 27: ...25 DK BB1 6 B ERRN 6HLWH LHQVWDJ XOL ...
Страница 41: ...39 FR BB1 6 B ERRN 6HLWH LHQVWDJ XOL ...
Страница 77: ...75 DE BB1 6 B ERRN 6HLWH LHQVWDJ XOL ...