SHSS 12 C2
GB
│
7
■
Operation
ATTENTION! MATERIAL DAMAGE!
►
The suction opening must always be open and
unblocked. Blockages lead to overheating and
damage to the motor.
►
Do not vacuum shag pile carpet with the floor
nozzle. The rotary brush
.
can get caught in
the carpet and block!
NOTE
►
Make certain that the dust filter
and the
coarse filter
are always inserted before
using the appliance.
►
As soon as the suction power of the appliance
begins to diminish noticeably, connect the
appliance to the charger
+
.
Using the hand element with the
handle
1) Insert the hand element
into the hand
element recess
!
as described in the chapter
“Assembly/disassembly”.
2) Fold out the grip
by pressing the “Grip”
release
-
and at the same time pulling the
grip
upwards.
3) Switch on the appliance using the on/off
switch
. The LED lamp
0
on the floor nozzle
will illuminate and the rotary brush
.
starts
turning.
4) Guide the floor nozzle over the area to be
vacuumed. Hold the grip
so that the floor
nozzle moves smoothly over the floor.
5) Press the on/off switch
when you have
finished vacuuming. The rotary brush
.
stops
and the LED lamp
0
goes out.
Using the hand element
1) Remove the hand element
from the hand
element recess
!
as described in the chapter
“Assembly/disassembly”.
2) As required, attach the crevice tool
1
, the
brush nozzle
6
or the upholstery nozzle
%
.
3) Set the on/off switch
to start vacuuming the
desired areas.
4) When you have finished vacuuming, press the
on/off switch
again.
Cleaning and care
WARNING! RISK OF INJURY!
►
Always disconnect the charger
+
from the
mains socket and remove the barrel jack
,
from the charging socket
on the cradle
"
before cleaning the cradle
"
.
►
Always remove the hand element
from the
hand element recess
!
on the handle before
cleaning the hand element
, the handle or
the rotary brush
.
.
To achieve the best results, empty the dirt container
and clean the dust filter
after every use.
ATTENTION! MATERIAL DAMAGE!
►
Do not use abrasive or aggressive cleaning
materials. These could damage the surface
of the appliance!
NOTE
►
The LED lamp
0
is maintenance-free.
The LEDs cannot be changed.
Содержание 277091
