Silvercrest 273374, Руководство по эксплуатации

Страница: 7 / 54

5
GB
WARNING! Risk of material
damage
~
Never place the device on hot surfaces
(e.g. hob plates) or near heat sources or
open fire.
~
Only use the original accessories.
~
Do not use any astringent or abrasive
cleaning agents.
4. Items supplied
1 tower fan 1
1 stand (consisting of 2 parts) 8
1 screw ring (screwed to the underside of
the fan) 12
1 set of operating instructions
Unpacking
1. Remove all parts from the packaging.
2. Check that all parts are present and in-
tact.
5. Assemble appliance
Before the appliance can be started up,
stand
8 needs to be screwed on.
1. Put rear half of the stand 10 and front
half of the stand 11 together.
NOTE: You can recognize rear half of the
stand 10 by the depression for power sup-
ply cable 9 .
2. Use screw ring 12 supplied to screw
stand 8 to the underside of the tower
fan.
NOTES:
• On delivery, screw ring 12 is screwed
onto the bottom of the tower fan.
• Ensure that power supply cable 9 is lo-
cated in the depression provided for it.
• Tighten screw ring 12 hand-tight. Do
not use a tool.
3. Select a location in line with the safety
instructions (see “Safety information”
on page 3).
4. Plug the power plug into a power sup-
ply socket which meets the technical
data requirements.
6. Operation
6.1 Start and switch off the
appliance
1. Plug the power plug into a power sup-
ply socket which meets the technical
data requirements.
2. Switch on the power
supply by turning rota-
ry switch
2 to " ON ".
The appliance is now
operational.
3. Switch off the power
supply by turning rota-
ry switch
2 to " OFF ".
__CPE273374 Tower Ventilator_B6.book Seite 5 Dienstag, 13. Oktober 2015 12:05 12