51
GB
6. Operation
Identical symbols on the buttons mean iden-
tical functioning. These instructions describe
the operation via the remote control
|
19
.
The selected function is shown on the dis-
play
|
10
.
As soon as the device is in operation, the
control lamp
|
18
lights up.
The device can be operated via the operating
panel
|
1
or via the remote control
|
19
.
6.1 Switching the device on
and off
1. Insert the mains plug into a wall socket
corresponding to the technical data.
2. Switch the device on by setting the main
switch
|
9
to
I
.
The main switch
|
9
and the display
|
10
are lit up. The device is in standby
mode.
3. Put the device into operating mode by
pressing the standby button
|
23
. The
control lamp
|
18
lights up.
4. In order to switch back to standby mode,
press the standby button
|
23
again.
After a few seconds stopping time, the
device switches into standby mode.
NOTE:
the device requires electricity in this
state.
5. In order to completely switch off the de-
vice, set the main switch
|
9
to
0
.
6.2 Setting the heat output
• Press
Mode
|
21
repeatedly until the de-
sired heat setting is shown on the dis-
play
|
10
:
6.3 Selecting the temperature
• The button
+
|
20
allows you to increase
the desired temperature up to 38 °C, while
the button
-
|
22
allows you to reduce the
desired temperature down to 6
|
°C.
The selected desired temperature is shown
on the display
|
34
.
The room temperature is measured by the
temperature sensor
|
8
and shown on the dis-
play
|
33
.
The device switches off automatically once
the room temperature has reached the de-
sired temperature. If the room temperature
falls below the desired temperature, the de-
vice automatically switches back on again.
6.4 Setting the running time
The device has a timer
|
24
, with which you
can set the desired running time. The run-
ning time can be set at between 1 minute
and 23 hours 59 minutes.
Upon reaching the end of the running time,
the device switches off automatically and
End
appears on the display.
Low heat output: device oper-
ates at 1,000 watt
High heat output: device oper-
ates at 2,000 watt
Automatic mode: the device au-
tomatically adapts the heat out-
put to the room temperature.
Frost protection: the device only
switches on at 6 °C ambient
temperature.
BB&3(B%ERRN6HLWH)UHLWDJ)HEUXDU
Содержание 271514
Страница 45: ...43 PT BB 3 B ERRN 6HLWH UHLWDJ HEUXDU ...
Страница 71: ...69 DE BB 3 B ERRN 6HLWH UHLWDJ HEUXDU ...
Страница 72: ...BB 3 B ERRN 6HLWH UHLWDJ HEUXDU ...
Страница 73: ...BB 3 B ERRN 6HLWH UHLWDJ HEUXDU ...