10 GB
press the kg / lb / st button
7
to choose between
the units kg / lb / st:lb. For model Z31332B, press
the SET button
6
.
Measuring the body weight,
calorie requirement, proportion
of body fat, water, bones and
muscles
For model 103803-14-01 / 103803-14-02: If
the scales are switched off, press the SET button
to switch on the scales.
For model Z31332B: If the scales are switched
off, press the ON / OFF button
9
to switch on
the scales.
Press the UP button
2
or the DOWN button
3
to proceed to your user profile.
Note:
As soon as you reach your user profile,
all you personal data will be shown in the LC
display
1
.
Note:
Press the SET button to adapt your
personal data.
Step barefoot onto the platform
5
and do not
move. Ensure that you are standing on the two
electrodes
4
.
The weight measurement is beginning; remain
standing on the two electrodes. The measure-
ment lasts a few seconds (display indication
- - -
).
The LC display then shows the measured values
three times alternating between two groups.
Group 1:
Percentage of body fat
25
and
water
22
, weight (kg / lb / st:lb)
11
,
12
,
13
and body fat index
15
Group 2:
Percentage of muscles
24
, bones
21
and calorie requirement
14
Note:
The display will show Err2, if you do not
stand on the two electrodes during weighing,
or if the total weight is above the weighing range.
The scales switch off automatically after these
values have been displayed.
Calibration of scales
Note:
The scales must be re-calibrated whenever
they are moved or after every battery replacement.
To do this, proceed as follows:
Step on to the scales. The scales will show you
an incorrect measuring result.
Step off the platform
5
once again. The scales
will calibrate automatically. Wait until the scales
switch off automatically.
Step onto the scales once again. The scales
will show you the correct measuring result.
Meaning of the
interpreted values
LC display
Meaning
thin
normal
overweight
extremely overweight
Trouble-shooting
The device contains delicate electronic components.
This means that if it is placed near an object that
transmits radio signals, it could cause interference.
If the display indicates a problem, move such
objects away from it.
Electrostatic discharges can lead to malfunctions. In
cases of the appliance failing to work, remove the
batteries for a short while and then replace them.
103803_silv_Koerperfettwaage_content_PL_HU_CZ_SK.indd 10
24.09.14 15:08