47
SGP 28 A1
GB
MT
4) Place the container
7
onto the motor unit
4
as described in the chapter
"Attaching the container". Ensure that the pusher does not fall out of the
motor unit and that none of the mass/dough escapes from the container.
LO
CK
5) Insert the plug into a mains power socket.
You can now form pastries/add decorations.
Shaping biscuits
NOTES
Use only the pattern discs
w
for shaping biscuits.
Do not line the baking tray with Tefl on, fats or oil paper, as the biscuits then do
not keep their shape.
Ensure that the locking ring
q
sits fi rmly on the container
7
and that the
container
7
is correctly mounted on the motor unit
4
before you switch the
appliance on.
1) Hold the biscuit shaper a little way above the baking tray.
2) Press on the start button
1
until the fi rst biscuit has been formed. The length
of time you need to press the start button
1
is dependent on the desired
shape and size of the biscuit. If you press the start button
1
for just a short
time, you will form a small biscuit. The longer you press the start button
1
,
the larger the biscuit will be.
3) Release the start button
1
and move the biscuit shaper to another position.
4) Repeat the steps until you have shaped a suffi cient number of biscuits.
NOTE
If the dough is too sticky, place it in the refrigerator for 15 minutes.
IB_100631_SGP28A1_LB5.indb 47
IB_100631_SGP28A1_LB5.indb 47
25.07.14 08:09
25.07.14 08:09
