Cream Dispenser
Model SK-2
SK-2 Cream Dispenser
5
Installation
Install the drip tray and drip tray cover
4
1
Locate the Unit
. Move the unit to its mounting
location.
2
Install the four legs underneath the unit.
The dis-
penser is shipped without legs attached. To install,
carefully tilt the unit and thread the legs into the
four corner holes on the bottom of the dispenser.
Connect the unit to power.
Plug in the power cord
5
on the back of the unit, at the left rear. Run the cord
along the rear of the shelf and plug it into the designat-
ed outlet.
WARNING
The power cord comes with a 3-prong plug for grounding pur-
poses. Any attempt to cut off this grounding spike or to connect
to an ungrounded adapter plug could result in serious injury,
will void the warranty and terminates the manufacturer’s
responsibility.
3
Level the Unit.
In order for the unit to function
properly, level the unit front to back and side to side.
Adjust the lower portion of the legs to level the unit.
WARNING
To avoid injury, it is recommended that the
unit be moved by two people
IMPORTANT
After installation and before the unit goes into service, it
must be cleaned and sanitized.
Drip Tray
Cover
Drip Tray
