SK-1 Cream Dispenser
3
Printed in USA 10/15
366-155
115V 60 Hz 1 Phase
Indicates information important to the proper operation of the
unit. Failure to observe may result in damage to the equipment
and/or severe bodily injury or death
WARNING
Indicates information important to the operation of the unit. Failure
to observe may result in damage to the equipment
CAUTION
WARNING
Risk of Electric Shock.
Always unplug the power cord before servicing the unit or
removing the back panel or front apron to avoid electric
shock.
Unit MUST be plugged into a 3-prong plug for grounding.
Cutting off the grounding spike on the power cord could re-
sult in electric shock to the operator during operation.
Unit must be plugged into a 15 or 20 ampere fuse- or breaker
-protected circuit. Use of a larger fuse or breaker could result
in damage to the unit and electric shock to the operator.
General Precautions
Moving or Handling Hot Parts.
Some parts may remain hot even after being unplugged.
Always use caution when servicing.
Possible Back Injury.
Assistance in moving this piece of equipment is strongly
recommended to avoid injury.
Always lift with your legs and not your back when lifting this
unit.
The SK-1 Cream Dispenser is designed to hold and
dispense bulk coffee cream. It will dispense three portion sizes
– 1 cream packet, 2 cream packets or 3 cream packets.
Prince Castle reserves the right to change specifications
and product design without notice. Such revisions do not
entitle the buyer to corresponding changes, improvements,
additions or replacements for previously purchased
equipment.
Safety Information
Electrical Specification
Important
General
Product Valve
Control Panel
Drip Tray
Power Cord
(on back side)
Power Switch
(on back side)
Product Identification
