Fox-in-a-Box® Thermal Printer Installation Guide
Loading Label Rolls - Legend™ 2-Part Labels
7.
Close the head unit by pushing down the head
close knob until the head unit locks into position
(you will hear a "click").
8.
Ensure that the Horizontal and Vertical dials
have been set to the correct setting for the labels
- see Printer Settings for more details.
9.
Close the printer lid then press the FEED but-
ton.
The printer will automatically align itself to the next
available label sheet. Your labels are now ready for
printing.
Note: If the labels continue to feed without stopping
after pressing the FEED button or if the
labels do not print correctly then check that the upper
and lower sensors have been correctly aligned.
Please note:
The photographs used show the
full-width thermal ribbon-order code: TSR3/300/110.
The half-width ribbon, order code: TSR3/300/60 can
also be used with the 30mm (L6/30T) and the 50mm
(L6/50T) 2-part labelling system labels.
The 20mm (L6/20T) labels can be printed with the
TSR3/300/110 thermal ribbon only.
www.silverfox.co.uk
R4.0
Page 20 of 35
Copyright © 2015 Silver Fox Limited
