Fox-in-a-Box® Thermal Printer Installation Guide
Loading Label Rolls - Legend™ 2-Part Labels
1.
Open the printer lid and push the large blue
head-open lever to release the head unit.
2.
Fit the label roll onto the media holder bar and
place into the rear of the printer. Put the upper
sensor arm to the open position (up).
3.
Align the bottom sensor so that it is in the mid-
dle of the main label itself and not over the label
"feeding tails".
4.
Put the upper sensor arm to the closed posi-
tion (down) and move the upper sensor so that
the white marks on both are aligned.
5.
Put the upper sensor arm to the open position
(up). Manually feed the label roll through the
printer then align the moveable guide so that it
rests against the right hand side of the label roll.
6.
Put the upper sensor arm to the closed posi-
tion (down).
www.silverfox.co.uk
R4.0
Page 19 of 35
Copyright © 2015 Silver Fox Limited
