When your pram is first purchased, the body, chassis and wheels are packed separately.
Remove all packaging before putting the pram together.
This pram has not been designed for use as a carrycot/pram. It should only be folded for
transportation or storage.
F I T T I N G T H E W H E E L S
Always check that the parking device is in the
OFF
position before trying to fit the wheels
or the parking device wire will be damaged.
Lift the lever
‘A’
of the parking device so that it is the
OFF
position.
A
B
C
Turn the chassis on its side. Pull out the metal tab
‘B’
on the wheel and slide it onto the
wheel axle
‘C’
.
Lift the wheel until the metal tab
‘B’
clicks into place. The wheel should be held firmly in
position.
Repeat for the other three wheels.
Kensington_English NEW 25/6/03 3:55 pm Page 2
