- 5 -
Removing the lid
To make the cleaning of the appliance interior easier,
you can remove the lid
w
:
• Open the lid
w
.
• Press the lid
w
, as shown in the diagramme, to
the rear
q
.
• You can then pull out the hinge and lift out the
lid
w
, as shown in the diagramme
w
.
• On reassembly, ensure that the lid
w
is put in
the correct way round. The thickening at the frame
of the lid
w
must point upwards when it is being
replaced, and also the level surface of the frame
to the handle
r
. Otherwise, the lid
w
cannot
be closed!
w
q
Removing/replacing the pouring sieve
• Open the lid
w
.
• Pull the pourer sieve
q
upwards out of its holder.
• Clean the pouring sieve
q
with a lightly moistened
dishcloth and under running water.
• After cleaning, insert the pouring sieve
q
from
above and press it firmly into place. Ensure that
the bar on the pourer sieve
q
is gripped in the
guide rail.
• Should the scale deposits in the pourer sieve
q
be firmly settled, lay it in a water-vinegar solution,
with a ratio of 6:1, for a few hours. The scale
deposits will dissolve themselves. Rinse the pourer
sieve
q
with lots of clear water.
Storage
Allow the appliance to cool off completely before
putting it into storage.
• Wind the power cable
u
around the holder on
the bottom of the appliance.
• Store the appliance in a dry place.
IB_75768_SWKG3000A1_LB7 18.06.2012 9:37 Uhr Seite 5
