SF-106 Silvair Lighting Evaluation Kit User manual
3.1 Basic hardware setup
These steps are common for all versions of firmware.
1. Insert the Silvair Light Module into the socket in the centre of the main board:
2. Select the lighting option [1 | DIM] using the linear switch (SW2). This allows the Silvair
Lighting Evaluation Board to distribute the signals correctly for different firmware types.
Currently, options 2 and 3 (UART and DALI) are available, HSL - is not available yet.
[email protected] www.silvair.com
page
11
Copyright © 2020 by SILVAIR, Inc. and SILVAIR group companies (“SILVAIR”). All Rights Reserved.
