SF-106 Silvair Lighting Evaluation Kit User manual
3. Configuration
The kit is designed to provide everything you need to test the Silvair technology, including a
light source (LED Board for standalone mode). However, if you want to control your own 0-10V
driver, insert the 0-10V Module into the appropriate socket (external device mode) and
connect the driver to it.
Every time you power up the Silvair Lighting Evaluation Board, you will notice a specific starting
sequence depending on the type of firmware and device state (i.e. whether it is already part of a
Bluetooth mesh network or not).
Status_LED output provides an indication of the device state:
[email protected] www.silvair.com
page
10
Copyright © 2020 by SILVAIR, Inc. and SILVAIR group companies (“SILVAIR”). All Rights Reserved.
