Silux Home Touch Lamina SC-TLSA01, Руководство по эксплуатации

Страница: 7 / 12

Network Pairing Mode
This requires you to discover the Touch Lamina ® from the Android / IOS App.
1. Once the teach light stops flashing, all the buttons will be network paired.
2. Tap a button on the front of the Touch Lamina
®
to ensure it is discoverable
on the network.
3. Open your Silux Home ® App.
4. Tap on the “Add device” button.
5. Look for the Touch Lamina
®
in the list of devices, by its serial number.
(Located on the sticker on the underside of the Touch Lamina ® plastics, or
on the Touch Lamina ® packaging)
6. Tap on the “Add” button and fill in the required details.
7. Press "save" and the Touch Lamina
®
will be available to link to Silux
Home ® devices or schedules.
*Please note: After pressing the teach button you have 30 seconds to pair
the devices.
V. How to delete (unpair) paired Silux Home
®
devices:
To delete a Silux Home ® device from the Touch Lamina ® both the Touch
Lamina
®
and device needs to be on.
1. Press the teach button on the Silux Home
®
device you wish to unpair.
2. Press the teach button on the Touch Lamina ® three times. The light will
start flashing.
3.
Press the button on the Touch Lamina
®
front panel you wish to
unpair or delete. Once pressed, the teach light will go solid.
4.
The light on the Touch Lamina
®
will begin to flash again.
5.
You can then tap the next button on the front panel of the Touch
Lamina
®
you wish to unpair / delete, and repeat the above process.
6. Once both lights have stopped flickering, your device will be
unpaired.
VI. How to control a Silux Home
®
device:
Once the Touch Lamina ® is paired to a device, the device can be
controlled by touching a button previously paired. The Touch Lamina
®
can also dim a device by tapping and holding the corresponding button.
You are able to pair up to 6 buttons to one device. This can be done by
different combinations ranging from 6 buttons paired onto one Touch
Lamina
®
or 1 button paired onto 6 different Touch Lamina
®
’s.
*Please note: The Collector
®
controlling the device hase to be the
Collector Dimmable
®
to be able to dim.