IV. How to pair with Silux
Home
®
Devices:
NOTE: There is 2 types of Pairing you can choose to use, namely;
1.
Network Pairing
- This enables you to connect a button to the Silux
Home
®
Network, to control any device on the Silux
Home
®
Network, and to
be used with more than one device.
Use this option if you wish to control a device which is located far away from
your touch lamina and to make use of the intelligence of the network. Or if
you wish to control more than one device at a time, or if you would like your
button governed by times or duration.
2.
Direct Pairing
- Direct pairing is used when you wish to control a single in
range device with a single button, namely using the Touch Lamina
®
in the
Lounge only to control lights in the lounge.
Starting Pairing:
1. Locate the teach button, on the bottom right corner of the inside of your
Touch Lamina
®
.
2. Press the teach button as follows;
2.1 Press the teach button once only to start pairing to the Network Pairing
Mode. (The teach light was flash slowly next to the button)
2.2 Press the teach button twice to start pairing in Direct Pairing Mode (The
teach light was flash fast next to the button)
Pairing Devices:
Direct Pairing Mode
1.
Press the teach button on the Silux
Home
®
device you wish to control,
which should be in the same room as the Touch Lamina
®
.
2.
Press the button on the front of the Touch Lamina
®
you wish to pair.
The teach light will stay solid on.
3.
On the Touch Lamina
®
the teach light will start to flicker once paired
and stop after 10 seconds.
4.
The teaching of that button on the front plate of the Touch Lamina
®
is
complete.
5.
To program another button on the Touch Lamina
®
, repeat the above
process.
