Silux Control SC-TS01, Руководство по эксплуатации, Страница: 7 / 12

TV
TV
Water Heater
IntelliHub
Tier 1 Tier 2 Tier 3
6. Hubcentric topology.
Your Silux Control
®
automation system uses a technology known as
Hubcentric topology. This means that all your devices communicate with
each other. In larger areas, it is possible that a device might be too far
from the IntellihHub
®
to communicate reliably. Your IntelliHub
®
will then
use other devices which are more in range to create a more reliable
connection to the out of range device. The distance at which your
IntelliHub
®
can communicate with your Silux Control
®
devices varies
according to the environment. The IntelliHub
®
has been developed to
achieve a distance of 20m, however, thick walls, large electrical
appliances and long distances are 3 factors that can limit communication
with Silux Control
®
devices. Use the “diagnostics” section of your Silux
Control
®
app to diagnose any issues you might be experiencing with
communication on your Silux Control
®
Network.
7. What is a Trigger:
An ‘trigger’ is a device, used to control a Silux Control
®
device. Think
of it as a remote control. This device will only be on for a brief period
of time while sending the command to your Silux Control
®
device and
will go back into sleep mode if the command was successful. Since
this device will be in sleep mode, most of the time, it doesn’t form part
of the intercommunication system. Please see the diagram above for
the intercommunication system.
*Please Note: The Seeker
®
and Touch Lamina
®
are examples of end
points.
8. Factory Reset:
This function will remove all paired devices and restore the settings to
the original state. Press and hold the Teach button on the Thermo
Stabilizer
©
for 5 consecutive seconds. On the 5th second, the light will
flash 3 times. Your device will now be restored to its default state.