Smile Preview Veneer Preparation I 9
Squeeze the material between your fingers prior to placing on the tooth.
Now you are ready to create your Smile Preview Veneer. With a little
practice this will take about 2 minutes per tooth to create.
Move
ProVeneer
to the middle third of the tooth. Do not drag toward the
cervical quite yet. Notice how the material goes exactly where you want it.
Creating the incisal half of the veneer takes about 20 seconds. Do not attempt to bring the veneer material all the way
down to the gum line. Maintain control of the veneer esthetics by doing it in halves.
Turn off your overhead light. Place the material on the incisal half of the tooth. Leave some material on the incisal edge
to create a positive rest stop (necessary when cementing the veneer) but not on the lingual.
Tip:
If any material is placed on the lingual of the tooth or in undercuts (such as the mesial or distal surfaces of the teeth)
remove it
before
light curing. If you do not, the veneer will fracture upon removal from the tooth. This is easy to avoid.
After you are pleased with the shape, contour and positioning of
ProVeneer
on the incised half of the facial surface of
the tooth, use your gloved finger to gently move and sculpt the veneer material to the gum line of the tooth. With
practice this will take another 20 seconds.
