Silicon Solar Inc | 2917 State Hwy 7, Bainbridge, N.Y. 13733 | Ph: 800.786.0329 | www.SiliconSolar.com
SOLAR LED SPOT LIGHT
OPERATION INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS BEFORE OPERATING YOUR SOLAR LIGHT. SAVE
THIS MANUAL FOR FUTURE REFERENCE.
1. PARTS CONTAINED
To check if the following parts contained for each light set.
1) battery box with dual spot light 1pc
2) solar panel 1pc
3) ground stakes 2pcs
2. INSTALLATION
Solar spot light must be installed in a sunny location where it can receive maximum sunlight at
daytime. Any cover, shade or shadowing will affect the solar penal to absorb sunlight and its
function will be decreased.
The selected location should not be near a nighttime light source such as a porch light, street light,
etc., as these lights might prevent the solar spot light from automatically turning on.
Battery box
can be insert into ground by using provided ground stakes..
Make sure that the solar panel should face sun to make the solar panel to absorb maximum sunlight.
Angle of battery box can be readjusted.
Light Head
can be inserted into ground by provided stakes too. Carefully to do it. Don’t damage
wires when connecting light head and battery box.
Turn power switch at
ON
position the light will operate automatically.
3. TROUBLESHOOTING INFORMATION
The performance of solar powered light depends upon the amount of sunlight available during
daylight hours. If your solar light can not operate properly you
can check it and find out the cause as listed below.
1) Light dim
Battery is not fully charged or needs replacement.
