Innovative Solar Solutions | 2917 State Hwy 7, Bainbridge, N.Y. 13733 | Ph: 800.786.0329 | www.SiliconSolar.com
SOLAR PUMP USER’S MANUAL
Item No.: AQUAJET-CUSTOM-KIT-24V-V2
1. OVERVIEW
1)
The solar water pump is designed for fountains, small waterfalls or
pond water filtrations, etc. and is powered by a solar module.
2)
The solar module needs to be placed in the sunlight with its solar
cells facing the sun as much as possible.
3)
The power supply of the pump is provided by a battery station which
is charged by the solar module, so that the pump is capable of
working at nights and on overcast days.
4)
The latest DC brushless motor technology is introduced in the pump
design and manufacturing, so that the pump has high efficiency and
long service life.
5)
The pump has a built-in function of dry-run protection. The dry-run protection function is provided by two
sensor points on one side of the pump body (not visible from outside). The pump works if both of the points
are submerged in water. If either or both points emerge out of water, the pump stops working.
2.
COMPONENTS
1)Solar module and ground spike
2)Pump
3)“Y” connector
4)Extension cord
5)Battery station
6)Hose connection
7)Gland nut
3.
ASSEMBLING
1)
Unpack all components carefully.
2)
Electrically connect the two solar panels and the input power cord on the back of the battery station through
the “Y” connector and the extension cord as shown in the figure above, and then tighten the plug protection
screws. Install the two solar panels at a sunny place by the ground spikes, adjust the angle to face the solar
panels toward the sun.
3)
Electrically connect the pump to the 18V output port 1 of the battery station and tighten the plug protection
screw.
4)
Mount the hose connection to the pump outlet by means of the enclosed gland nut. Thanks to the ball joint
design, the angle of the hose connection could be adjusted under water when necessary.
5)
Attach the hose onto the outlet of the hose connection. The hose connection is suitable for various hose
diameters (inside diameter 25,32 or 38 mm).
6)
Completely immerse the stream pump into the water.
