manualshive.com logo in svg

Silicon Laboratories SLWRB4150A, Руководство пользователя

Поделиться
Скачать
Silicon Laboratories SLWRB4150A Скачать руководство пользователя страница 1

UG178: EFR32MG 2400/868 MHz 13 dBm
Dual Band Radio Board

The SLWRB4150A Radio Board for the Wireless Starter Kit Main-
board is an excellent starting point to get familiar with the
EFR32™ Mighty Gecko Wireless System-on-Chip.

The Wireless Starter Kit Mainboard contains sensors and peripherals demonstrating
some of the Mighty Gecko's many capabilities. These together provide all necessary
tools for developing a Silicon Labs wireless application.

The WSTK Mainboard is included with all Silicon Labs Wireless Starter Kits. It is not in-
cluded when purchasing a single radio board.

RADIO BOARD FEATURES

• EFR32 Mighty Gecko Wireless SoC with

256 kB Flash and 32 kB RAM.
(EFR32MG1P233F256GM48)

• Inverted-F PCB antenna (2.4 GHz band)
• SMA connector (868 MHz band)

WSTK MAINBOARD FEATURES

• Ethernet and USB connectivity
• Advanced Energy Monitor
• Packet Trace Interface support
• SEGGER J-Link on-board debugger
• Debug Multiplexer supporting external

hardware as well as radio board

• Silicon Labs' Si7021 Relative Humidity and

Temperature sensor

• Ultra low power 128x128 pixel Memory

LCD

• User LEDs / Pushbuttons
• 20-pin 2.54 mm header for expansion

boards

• Breakout pads for direct access to all radio

I/O pins

• Power sources includes USB, CR2032

coin cell and AA batteries.

SOFTWARE SUPPORT

• Simplicity Studio™
• Energy Profiler
• Network Analyzer

silabs.com

 | Smart. Connected. Energy-friendly.

Rev.  1.00 

Содержание SLWRB4150A
































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды