S i 8 2 5 x M u l t i - P h a s e P O L - R D
14
Rev. 0.2
Figure 10. DPWM Timing Diagram Editor—Phase 2
3. Click the
Simulate
button
to display the Simulate Window (see Figure 11). Use the arrows to increase and
decrease the value of u(n). Notice that Phase 1’s edge should modulate with its absolute edge starting at 10
ticks. Phase 2 should also modulate. However, its rising edge starts relative to Phase 1’s falling edge.
Figure 11. DPWM Timing Diagram Editor—Timing Simulator
4. Now that the desired timing for the two-phase system has been created, click on
OK
. The Application Builder
will automatically extract the correct DPWM timing initialization data for the Kernel. These coefficients can be
saved to a new project file if desired for later use. Click on
File
Save
Project
to save this project. To generate
an IDE project, select
File
Build IDE Project...
and select the directory for project generation.
Содержание Si825x
Страница 29: ...Si825x Multi Phase POL RD Rev 0 2 29 NOTES ...
