10.7 Workflow Scenario 3: Testing a User-Created Device Configuration
To test a previously created user configuration, open the CBPro Wizard by clicking on the icon on your desktop and then selecting
Open Design Project File.
Figure 10.17. Open Design Project File
Locate your CBPro design file (*.slabtimeproj or *.sitproj file).design file in the Windows file browser.
Figure 10.18. Browse to Project File
Select "Yes" when the WRITE DESIGN to EVB popup appears:
Figure 10.19. Write Design to EVB Dialog
The progress bar will be launched. Once the new design project file has been written to the device, verify the presence and frequencies
of your output clocks and other operating configurations using external instrumentation.
UG353: Si5397 Evaluation Board User's Guide
Using the Si5397-EVB
silabs.com
| Building a more connected world.
Rev. 0.1 | 22
