11. Writing a New Frequency Plan or Device Configuration to Non-Volatile Memory (OTP)
Note:
Writing to the device non-volatile memory (OTP) is
NOT
the same as writing a configuration into the Si5395 using ClockBuilder-
Pro on the Si5395 EVB. Writing a configuration into the EVB from ClockBuilderPro is done using Si5395 RAM space and can be done a
virtually unlimited numbers of times. Writing to OTP is limited as described below.
Refer to the Si5395 Family Reference Manual and device data sheets for information on how to write a configuration to the EVB DUT’s
non-volatile memory (OTP). The OTP can be programmed a maximum of
two
times only. Care must be taken to ensure the desired
configuration is valid when choosing to write to OTP.
UG335: Si5395 Evaluation Board User's Guide
Writing a New Frequency Plan or Device Configuration to Non-Volatile Memory (OTP)
silabs.com
| Building a more connected world.
Rev. 0.96 | 25