Once you open the default plan (based on your EVB model number), a popup will appear:
Figure 10.7. Write Design to EVB Dialog
Select “Yes” to write the default plan to the Si5395 device mounted on your EVB. This ensures the device is completely reconfigured
per the Silicon Labs default plan for the DUT type mounted on the EVB.
Figure 10.8. Writing Design Status
After CBPro writes the default plan to the EVB, click on “Open EVB GUI” as shown below:
Figure 10.9. Open EVB GUI
The EVB GUI will appear. Note that all power supplies will be set to the values defined in the device’s default CBPro project file created
by Silicon Labs, as shown in the following figure:
UG335: Si5395 Evaluation Board User's Guide
Using the Si5395 EVB
silabs.com
| Building a more connected world.
Rev. 0.96 | 15