Silicon Laboratories Si5338, Руководство пользователя

Страница: 11 / 16

S i 5 3 3 8 / 5 6 - P R O G - E V B
Rev. 0.4 11
Installing Microsoft .NET Framework 1.1
Skip this section if Microsoft .NET Framework 1.1 has already been installed to your system. See Section for
details. Installation instructions for the.NET Framework are available from the Microsoft website using the following
link:
http://www.microsoft.com/downloads details.aspx?FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en
There are several versions of the .NET Framework available from Microsoft. Multiple versions can be installed on
the same PC. The Software requires Version 1.1. Contact your system administrator for more details.
ClockBuilder Desktop Software Installation
The ClockBuilder Desktop Software is installed from the ClockBuilderDesktopSwInstall.exe file.
1. Double-click the ClockBuilderDesktopSwInstall.exe file to start the wizard.
2. Follow the instructions to complete the installation for both the software and the USB driver. Use the default
installation location for best results.
3. Once the software installation is complete, refer to the next section for the USB driver installation.
USBXpress Driver Installation
The Field Programmer uses the Silicon Laboratories' USBXpress driver to allow the EVB to communicate with the
host PC. The driver must be installed after the ClockBuilder Desktop Software is installed. Click Install to run the
driver installation.
If the USB driver was already installed from previous Silicon Laboratories evaluation software, it will not be
reinstalled. A message box will appear as shown below. Click OK to close the message.
Your software installation is now complete.