manualshive.com logo in svg

Silicon Imaging SI-2K, Руководство пользователя

Поделиться
Скачать
Silicon Imaging SI-2K Скачать руководство пользователя страница 52

  

 

LookControl

SI 2K Manual

The RGB difference keyer works on a „threshold“ principal, where the lower 
the threshold, the more green or blue is keyed out. The general workflow is that 
the user picks the screen color using the GREEN or BLUE buttons, and then 
reduces the threshold until a proper key is made.

The default background behind the key is a GREY MATTE, and this substitutes 
a neutral grey color for the keyed out areas of the image to show the user the 
quality of the edge-matte, and it also helps to pick out any areas of bright or 
dark corruption on the green-screen such as excessive noise, glare, false edg-
es, etc. In order to view the background image, simply click the GREY MATTE 
button, and it will toggle off.

If an image is already in the frame-store of the camera, the user can see this 
image by toggling the GREY MATTE off, but if there is no image in the frame-
store,  then  the  background  will  simply  be  black.  By  clicking  on  the  LOAD 
MATTE IMAGE, the user can load up a .bmp image as a background to visual-
ize the effectiveness of the key. This image will also be loaded into the internal 
frame-store of the camera, so it will be available after exiting the IRIDAS control 
panel as well.

By default, the keyer is in a COMPOSITE mode that composites either a GREY 
MATTE or background image from the framestore with the keyed out foreground 
image. Alternatively the user can isolate the ALPHA, the BACKGROUND, or 
the FOREGROUND using the associated buttons on the interface. If the user 
would like to make additional color-corrections to the image in CONTROL SET 
1 or 2 without having the keyer active, activating the FOREGROUND mode 
will deactivate the compositing effects of the keyer.

After the key is made, simply hit the „SAVE“ button, and save out the new .look 
file. After pressing the DONE button, the user will be taken back to the main 
screen, where the key will then be applied to the subject in real-time in the main 
preview display. Note that if there was no background image loaded into the 
framestore of the camera to composite behind the keyed source image, there 
will be a black background in the keyed out areas of the subject image.

Содержание SI-2K

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды