manualshive.com logo in svg

Silicon Imaging SI-2K, Руководство пользователя

Поделиться
Скачать
Silicon Imaging SI-2K Скачать руководство пользователя страница 24

  4

 

QuickStartGuide

SI 2K Manual

In addition, any mapped hard disk can be used for recording. This includes any 
device that are connected via the external USB ports. Be sure that any external 
drive supports a sustained throughput of 40 MB/sec. Two extra USB 2.0 ports 
are available on the back.

IMPORTANT:

If you want to use additional USB recording devices on the SI-2K please al-
ways add and remove them on and from the RUNNING SYSTEM (hot plug). 
Do NOT perform a reboot with any USB storage device attached to the SI-2K!! 
For  more  information  please  refer  to  the  chapter  Notes  on  Write  Protection 
Filter.
 

Ethernet

Two gigabit Ethernet ports are available on the rear of the camera for future 
use. These will be used for integrating the camera into a fully networked video 
village (LAN 0) for file transfer and camera control of an attached SI-2K Mini 
Head (LAN 1).

Files and File system

There are two ways recording RAW Data from the Camera.

1. Uncompressed RAW at a Data Rate of up to 100 MB/sec (approx.) result-
ing in *.siv files.

For displaying images recorded in this format, the IRIDAS Product Line 
(www.iridas.com) supports both *.siv and cineform *.avi.

2. CineFormRAW (compressed) at a maximum data rate of currently 30 MB/
sec (approx.) resulting in *. avi or *.mov files.

For displaying images recorded in this format, the free decoder plugin Neo 
Player (http://www.cineform.com/products/Downloads/DownloadNEOPlay-
erStart.htm) can be installed to run CineForm decoded movie files inside 
Windows Media Player or Quicktime Player Applications.
The standard file system on the disk enclosed by the exchangeable hard disk 
carrier must be formatted in NTFS.

Compressed CineForm RAW:

160 GB will approximately record 90 minutes at lowest compressed data 
rate (1 GB = 1024 MByte; recording time depends on settings and picture 
information).

Uncompressed:

160 GB will approximately record 25 minutes in uncompressed mode.
(1 GB = 1024 MByte; recording time depends on settings and picture infor-
mation).

Содержание SI-2K

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды