background image

© 2008 Silicon Imaging, Inc                                                                                                                      Page 37 

Silicon Imaging does not provide any, and expressly disclaims all, warranty or representation for these video 
sample files.   
 
9. LIMITED WARRANTY.  If the Software is delivered on physical or optical media, Silicon Imaging warrants 
the media on which the Software is furnished to be free of defects in material and workmanship, under normal 
use, for a period of thirty (30) days following the date of delivery to You. If there is defect in the media, Silicon 
Imaging’s sole liability shall be to replace the defective media, which has been returned to Silicon Imaging or 
the supplier with your dated invoice and is shown to be defective. In the event that Silicon Imaging is unable to 
replace defective media, Silicon Imaging shall at its sole discretion either refund your money upon your 
termination of this license or replace with the newer version of the same software. 
 
If the Software is delivered by electronic download, no warranty is provided or implied. 
  
EXCEPT ONLY AS EXPRESSLY STATED IN THIS AGREEMENT, THIS SOFTWARE AND 
DOCUMENTATION ARE PROVIDED WITHOUT WARRANTY OF ANY KIND. FURTHER, SILICON IMAGING 
DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE USE, OR 
THE RESULTS OF USE, OF THE SOFTWARE OR DOCUMENTATION IN TERMS OF CORRECTNESS, 
ACCURACY, RELIABILITY, CURRENTNESS, OR OTHERWISE.  AFTER THE EXPIRATION OF THE INITIAL 
30 DAY PERIOD AFTER DELIVERY TO YOU, NONE OF SILICON IMAGING OR ANY OF ITS DEALERS, 
DISTRIBUTORS, AGENTS OR REPRESENTATIVES SHALL HAVE ANY LIABILITY FOR REPAIR, 
REPLACEMENT OR OTHER RECOURSE RELATED TO THE SOFTWARE OR ITS DOCUMENTATION.  
  
EXCEPT FOR ANY EXPRESS WARRANTIES CONTAINED IN THIS AGREEMENT, SILICON IMAGING 
DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, RELATING TO THE SOFTWARE, 
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A 
PARTICULAR PURPOSE AND NONINFRINGEMENT, REGARDLESS OF WHETHER IT IS MADE BY 
SILICON IMAGING.  SILICON IMAGING DOES NOT WARRANT THAT THE SOFTWARE WILL BE 
UNINTERRUPTED OR ERROR-FREE. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY 
SILICON IMAGING, ITS DEALERS, DISTRIBUTORS, AGENTS OR EMPLOYEES SHALL CREATE A 
WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY AND YOU MAY NOT RELY 
ON ANY SUCH INFORMATION OR ADVICE.  
  
SILICON IMAGING’S ENTIRE LIABILITY AND YOUR EXCLUSIVE REMEDY IS LIMITED TO THE 30-DAY 
REFUND RIGHT SET FORTH ABOVE.  NEITHER SILICON IMAGING NOR ANYONE ELSE WHO HAS 
BEEN INVOLVED IN THE CREATION, PRODUCTION OR DELIVERY OF THIS PRODUCT SHALL BE 
LIABLE FOR ANY INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING DAMAGES 
FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF DATA, LOSS OF BUSINESS 
INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OR INABILITY TO USE 
SUCH PRODUCT EVEN IF SILICON IMAGING HAS BEEN ADVISED OF THE POSSBILITY OF SUCH 
DAMAGES. 
  
IN NO EVENT WILL SILICON IMAGING'S LIABILITY FOR ANY DAMAGES TO YOU OR ANY OTHER 
PERSON EXCEED THE AMOUNT PAID FOR THE LICENSE TO USE THE SOFTWARE. 
  
9. INDEMNITY.  You agree that Silicon Imaging shall have no liability whatsoever for any use You make of the 
Software.  You shall indemnify and hold Silicon Imaging harmless from any claims, damages, liabilities, costs 
and fees (including reasonable attorney fees) arising from Your use of the Software as well as from Your 
failure to comply with any term of this Agreement. 
  
10. TERM AND TERMINATION.  This Agreement shall continue until terminated as set forth in this section.  
You may terminate this Agreement at any time. Silicon Imaging may terminate this Agreement immediately if 
You violate any provision of this Agreement. Any termination of this Agreement shall also terminate the 
licenses granted hereunder. Upon termination of this Agreement for any reason, You shall destroy and remove 
from all computers, hard drives, networks, and other storage media all copies of the Software, shall cease all 
use of the Software, and shall so certify to Silicon Imaging that such actions have occurred.  Except for a 
properly requested refund within the first 30 days after delivery, You shall not be entitled to any refund as a 

Содержание SI-2K







































Отзывы: