© 2008 Silicon Imaging, Inc Page 14
3.0 SiliconDVR Installer (
For PC/Laptop Only
)
The installation instructions for installing SiliconDVR are split into two sets: One for Intel
Pro1000 NIC-based systems, and a second set for other generic NIC’s systems not compatible
with the Pleora High Performance Driver for Intel Pro1000 NIC’s (eg. Marvell Yukon). These
installation instructions assume a clean install of SiliconDVR.
If a previous version of SiliconDVR has been installed on the computer, follow the
uninstall steps in ‘
3.4
Uninstalling Previous Versions of SiliconDVR’
.
The SiliconDVR Installer is only to be used on computers meeting the minimum system
requirements outlined below. It is not for use on the SI-2K
3.1 - Minimum System Requirements:
•
Windows XP SP2 32-bit, SP3 32-bit, Vista Business 32-bit, Vista Ultimate 32-bit (Note:
SiliconDVR 1.1 is not compatible with 64-bit versions of Windows).
•
Intel Core 2 Duo 2.33Ghz Processor of faster. For Windows Vista, suggested CPU
processor is 2.4Ghz Intel Core 2 Duo or faster.
•
2GB of RAM. For Windows Vista, 4GB of RAM suggested.
•
Either Intel Pro1000 NIC or other 10/100/1000 Gigabit Ethernet NIC capable of 8K Jumbo
Packets
•
Intel GMA950 embedded graphics, GMA X3100 embedded graphics or Nvidia
Geforce/Quadro series of discreet graphics cards.
•
Hard-drive or SSD capable of sustained write throughput of 30MB/s.
