Orion and Maia ADD2 User Guide
7
SiI-
UG-0044-A
Usage
Insert the card in the PCI-Express slot of the Grantsdale G system, attach a DVI flat panel display using a DVI
cable, and boot the system. Use the correct ADD2 card (-N or -R) for the intended system. Using the wrong card
will not cause any damage, but it will not be initialized or show a display. The system should have Grantsdale G
drivers installed.
Enabling DVI Display and Changing Resolutions
All Grantsdale G video drivers provided by Intel have built in support to enable the ADD2 cards. No specialty
drivers are required. It is important to note that Silicon Image does not release, generate, or provide drivers. All
necessary drivers are available from Intel Corporation.
Download the latest Grantsdale G drivers from the Intel website or https:\\platformsw.intel.com. Install the driver
using the setup.exe file. Once installed, reboot the system and follow the instructions below
The following section provides guidance in using this application to capture and generate a DVI compliance
report.
a
. Attach a DVI flat panel display to the ADD2 card. Ensure that the display is turned on.
b
. On the Windows Desktop, right click and a dialog box will appear. Select “Graphics Options” and, if a digital
flat panel is attached to the system, the “Output To” selection will be available. Select either the “Digital Display”
option or the “Intel® Dual Display Clone” option to enable the digital flat panel.
Figure 5. Enabling Digital Display via Mouse
