3 Introduction
3-1 Battery operation
Front view
A. ON/OFF switch:
Leave in the OFF position during installation.
B . Over heat protection:
LED sparkles when product temperature
gets high, it would shut down automatically while temperature arrives
55
°C±5°C.
C.Overload protection:
Orange LED lights when inverter/charger shut
down due to overloading. Inverter would re-start one time, if failed,
inverter would shut down. Please turn inverter OFF, reduce load and
turn inverter ON to reset.
D. AC socket:
German
E. USB port :
Max. Current 2A
F. Light switch :
the light in front panel can supply lighting if needed
Side view:
A . Ventilation window:
Do not obstruct, allow at least one inch for
airflow.
B. Fuse:
40A/32V.If fuse damaged , please change it according to the
specification .
C. Solar port:
MC4 Standard
D. Battery terminals:
Connect to 12V battery or other 12Vpower
source. "+“ is positive, "-" is negative.
Reverse polarity connection will blow internal fuse and may damage
inverter permanently.
'Damage caused by reversed polarity is not
covered by the warranty.‘
4
WARNING!!
Operation of the inverter without a
proper ground connection may result
in an electrical safety hazard.
3-2 Panel operation
Front view
A. ON/OFF switch:
Leave in the OFF position during installation.
B . Over heat protection:
LED sparkles when product temperature
gets high, it would shut down automatically while temperature arrives
55
°C±5°C.
C.Overload protection:
Orange LED lights when inverter/charger shut
down due to overloading. Inverter would re-start one time, if failed,
inverter would shut down. Please turn inverter OFF, reduce load and
turn inverter ON to reset.
D. AC socket:
German
E. USB port :
Max. Current 2A
F. Light switch :
the light in front panel can supply lighting if needed
Side view:
A . Ventilation window:
Do not obstruct, allow at least one inch for
airflow.
B. Fuse:
40A/32V.If fuse damaged , please change it according to the
specification .
C. Solar port:
MC4 Standard
D. Battery terminals:
Connect to 12V battery or other 12Vpower
source. "+"
is positive, "-" is negative.
Reverse polarity connection will blow internal fuse and may damage
inverter permanently.
'Damage caused by reversed polarity is not
covered
by the warranty.‘
3-3 Status LED
5
