Silicon Graphics Rackable C2112-4GP3, Руководство пользователя

Страница: 20 / 70

4 007-6363-001
1: Introduction
Serverboard Features
At the heart of the SGI Rackable C2112-4GP3 server are dual-processor serverboards based on
the Intel
®
C612 chipset and designed to provide maximum performance. Four of these
serverboards can be mounted in the server chassis. Table 1-2 describes the major features of the
serverboards.
Table 1-2
Serverboard Features
Feature Description
Processors Each serverboard supports single or dual Intel Xeon
®
E5-2600 v3 Series
processors.
Memory Each serverboard has 16 DIMM slots supporting up to 1024 GB of
LRDIMM or 512 of RDIMM DDR4-2133/1866/1600 MHz registered ECC
memory.
SATA subsystem A SATA controller is integrated into the C612 chipset to provide up to a
10-port 6 Gb/s SATA3 subsystem. The SATA3 subsystem supports RAID 0,
1, 5, and 10. The SATA drives are hot-swappable units.
Note : The operating system you use must have RAID support to enable the
hot-swap capability and RAID function of the SATA drives.
PCI expansion
slots For each node, the server has one PCIe
®
3.0 x16 slot (Slot 1) available for
use with a riser card.
Onboard
controllers/ports A serverboard can include the following:
– An Intel i350 gigabit (10/100/1000 Mb/s) Ethernet dual-channel controller
or an Intel X540 10 gigabit Ethernet dual-channel controller
– One 9-pin RS-232 port
– One Mellonox
®
Connect-X3 InfiniBand
®
supporting a single QSFP
connector One COM port
– One VGA (monitor) port
– Two USB 2.0 ports (Additional internal USB headers are included on the
serverboard.)
– One IPMI-dedicated LAN port
– Two Ethernet ports
Graphics
controller Each serverboard features an integrated ASPEED
®
2400 BMC with an
integrated VGA/2D graphics controller.