Silicon Graphics Octane III Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 64

Silicon Graphics Octane III Скачать руководство пользователя страница 38

30

007-5633-001

4: Octane III Workstation BIOS Information

System Memory:

This displays the size of memory available in the system:

Size:

This item displays the memory size detected by the BIOS.

Advanced Setup Configurations

Use the arrow keys to select Boot Setup and hit

<Enter>

to access the submenu items:

BOOT Features

Quick Boot

If enabled, this option will skip certain tests during POST to reduce the time needed for system
boot. The options are Enabled and Disabled.

Quiet Boot

This option allows the bootup screen options to be modified between POST messages or the OEM
logo. Select

Disabled

to display the POST messages. Select

Enabled

to display the OEM logo

instead of the normal POST messages. The options are Enabled and Disabled.

Add-On ROM Display Mode

This sets the display mode for Option ROM. The options are

Force BIOS

and

Keep Current

.

Bootup Num-Lock

This feature selects the Power-on state for Numlock key. The options are Off and On.

Wait For 'F1' If Error

This forces the system to wait until the 'F1' key is pressed if an error occurs. The options are
Disabled and Enabled.

Hit 'Del' Message Display

«
...
36
37
38
39
40
...
»

Содержание Octane III

































































Отзывы:

Нет отзывов