manualshive.com logo in svg

Silicon Graphics InfiniteStorage NEXIS 2000, Быстрый старт

Поделиться
Скачать
Silicon Graphics InfiniteStorage NEXIS 2000 Скачать руководство пользователя страница 27

Rack Mounting Instructions

007-4988-001

23

1.

Make sure that the adjustment screws on the support rail are loose so that the support rail can 
extend or contract as needed.

2.

Place the support rail inside the rack and extend the support rail until the flanges on the 

support rail touch the inside of the rack mounting rail.

3.

Make sure that the alignment spacers on the front flange fit into the mounting holes in the 

rack, see Figure 1-20 on page 24.

Note:  

The front flange of each support rail has two alignment spacers.

Figure 1-19

Support Rail Attachment to Rack Example

Use the following numbers to identify the rail mounting points (shown in Figure 1-19) and 
components needed to complete the rail mounting process:

1.

Rack rail mounting holes

2.

Adjustment screws for locking the support rail length

3.

NAS disk expansion enclosure support rails

4.

Clip for securing the back of the RAID/disk expansion unit

The alignment spacers are designed to fit into the mounting holes in the rack. The alignment 
spacers help position and hold the support rails. Item 1 in Figure 1-19 on page 23 shows the 
location of the alignment spacers.

Содержание InfiniteStorage NEXIS 2000

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды